Reverting to Another Calibration

If you would like to revert your changes in the current calibration to another calibration, you can always Apply a different calibration by clicking Edit -> Apply different calibration...

Screenshot 2024-11-07 at 3.37.31 PM.png


The default selection in the Select Calibration dialog box will always be the Base Calibration you set for the current calibration, if applicable, for faster reverting:

Screenshot 2024-11-07 at 3.38.14 PM.png

The calibration will be updated. Note that only selected cells will be changed. In this case, Ctrl/Cmd+A was used to select the entire table before the operation took place:

Screenshot 2024-11-07 at 3.38.27 PM.png


Revision #2
Created 7 November 2024 20:34:52 by Matt
Updated 27 January 2025 14:43:32 by JoanOfHill